Saddling
![](dat/images/2019-10/1771b.jpg)
1. Put the saddle half pad on the saddle pad. Saddle half pad has to lie evenly on both sides.
![](dat/images/2019-10/1772b.jpg)
2. When you put on the saddle on the horse, pull up the top of the saddle half pad together with the saddle pad to make characteristic "spike" to leave the space for the withers.
![](dat/images/2019-10/1773b.jpg)
3. Align the saddle half pad evenly under the panels. The Winderen Back Protect Solution saddle half pad can work properly only when the entire surface of the saddle panels adheres to it.
Replacement of inserts
![](dat/images/2019-10/1774b.jpg)
1. Fully unzip the zippers along the entire length of the saddle half pad. Hold the front of the saddle half pad with your hand and gently pull out the inserts.
![](dat/images/2019-10/1775b.jpg)
2. Remember that Winderen Back Protect Solution has 3 technological foams that need to be inserted in the right direction. When you replace the cover, be careful to put inserts back in the cover properly.
![](dat/images/2019-10/1776b.jpg)
3. Bend the insert into the roll for easier exchange. After placing them inside, align saddle half pad with hand and make sure that inserts lie smoothly inside.
Replacement of correction felt inserts
![](dat/images/2018-01/314b.jpg)
1. Correction saddle half pad set includes two special insert covers with three pockets for correction inserts and 18 correction felt inserts (3 for each pocket with a unique shape for each one).
![](dat/images/2018-01/315b.jpg)
2. To facilitate the placement of the inserts, bend the felt correction panels gently and straighten them when they are in the correct position.
![](dat/images/2018-01/316b.jpg)
3. When you want to insert more than one felt correction insert in a pocket, put them together before putting them in the pocket.
Additional information
![](dat/images/2018-01/317b.png)
Saddle half pad stiffens in the cold temperature, but it does not change its properties. After putting on the horse, it warms up in a few moments.
![](dat/images/2018-01/318b.png)
Clean the saddle half pad cover with a damp sponge when it's necessary, or wash it (after removing the inside layers) at a temperature of 30˚C.
![](dat/images/2018-01/319b.png)
The saddle half pad returns up to the original shape after 1 minute, so it can be used on many horses and with many saddles.